HP Scanner Error 22 [Quick Fix Solution]
HP is known
for its products like desktop, computer, laptop printer, scanner and other
connectivity devices. HP scanner users might face some issues or errors with
the device due to certain reasons. The key is to not get bogged down by seeing
the error in the first instance. Errors are bound to occur and they can be
eliminated with some simple troubleshooting.
HP scanner
error 22 is a type of common error that might surface in your device, but
contact the HP scanner support experts for quick assistance. The error comes
when the head does not work. The scanner head may be defective or the flat
cable pin might be dirty. The error occurs when the laser light does not work
or the flat cable connecting it with the main PCB. The professionals engaged in
the troubleshooting are experienced enough to find the shortest method to get
solve the scanner errors.
Here are the
best steps to fix HP scanner error 22 -
·
Turn on the
printer. Disconnect the power cord and the wall outlet.
·
Now, wait
for at least 60 seconds.
·
Connect the
power cord to the wall wallet that has been removed earlier.
·
Then connect
the power cord to the printer.
·
Switch on
the printer and if it does not automatically turn on.
·
Printer
warm-up period will begin in which the lights flash and the carriage might
move.
· Wait till
the warm-up period ends and the printer is idle & silent.
Check if the
error is eliminated or not? If the problem is solved then start your scanner
work. If it is not solved then contact the HP scanner tech support for the best
assistance. HP scanner users are the best men to find quick solutions within a
limited time. The error can be solved at a very low rate of service charge over
the HP scanner helpline number.
Here are
some alternate steps to fix HP scanner error 22 –
·
Remove the
scanner cable carefully and clean it with rubber etc.
·
Make sure
that the cable is changed.
·
Remove the
default cable and use an effective cable.
Who can
assist the HP scanners users to get rid of the error if not solved effectively?
Dial the HP Scanner helpline number and reach out to experts for help. The
support experts make sure that remote diagnosis is done to resolve all scanner
errors within no time. (+1-855-461-5433)
Comments
Post a Comment